Protective Isolation FFP2 Face Mask is a type of mask which can protect you very well in bad environment. It is comfortable to wear for long time.
Packing Specifications: 5 pcs/pkg, 4 pkgs/box., 48 bxs. /CTN
Box Dimensions: 12×6.5×12 cm
Carton Dimensions: 49.5×27.5×38 cm
Weight: 8.1 kg
Protective Isolation FFP2 Face Mask is a stereoscopic type with size 16.5cm×10.5cm. Its particle filtration efficiency≥94%（Test according to EN 149 FFP2 NR）with executive standard EN 149:2001+A1:2009 FFP2 NR
Protective Isolation FFP2 Face Mask has 5 layers.
First layer——Polypropylene spun-bonded non-woven fabric
Second layer——Polypropylene melt-blown non-woven fabric
Third layer——Polypropylene melt-blown non-woven fabric
Forth layer——polyethylene-Polyethylene terephthalate air-blown non-woven fabric
Fifth layer——Polypropylene spun-bonded non-woven fabric
Nose clip——Polyethylene and iron wire
Rubber bands——Nylon / Polyurethane composites
Protective Isolation FFP2 Face Mask should be stored in a well ventilated, dark and dry environment.
Keep away from fire, pollutants and possible pollution sources. Also, the transport storage’s temperature: -20℃~40℃, relative humidity:<80%RH.
The following is the certificates of Protective Isolation FFP2 Face Mask.
Do not use the respirator or enter or stay in a contaminated area under the following circumstances:
1. Atmosphere contains less than 19.5% oxygen.
2. If you smell or taste contaminant.
3. For protection against gases or vapors.
4. Contaminants or their concentrations are unknown or immediately dangerous to life or health.
5. For sandblasting, paint-spray operations and asbestos treatment.
6. In explosive atmospheres.